Smart UPS Rt 10000va - 8000w Input-230v/ Output-230v
ITCurry #: 02803002 | Article #: SURT10000RMXLI-
ScreenMemoryWeightProcessorHard DiskSSDScreenResolutionConnectivityMemoryCaseOSScreenTypeSpeed BlackSpeed ColourModelProcessor SpeedForm FactorInternal / ExternalPort CountUplink / mediaMounting
- View All Specs
Bundles
Related products
Product Information
APC Smart-UPS RT, 10000VA/8000W, Input 230V/Output 230V, Interface Port DB-9 RS-232, RJ-45 10/100 Base-T, Smart-Slot, Extended runtime model, Rack Height 6 U
Includes: CD with software, Rack Mounting support rails, Service Manual, Smart UPS signalling RS-232 cable, User Manual, Web/SNMP Management Card
General Features:
Audible Alarms,
Automatic internal bypass,
Automatic restart of loads after UPS shutdown,
Automatic self-test,
Cold-start capable,
Disconnected battery notification,
Flash-upgradeable firmware,
Frequency and voltage regulation,
Generator Compatible,
Hot-swappable batteries,
InfraStruXure Manager Compatible,
Input Power Factor Correction,
Intelligent Battery Management,
LED status indicators,
Network manageable,
Plug-and-Play external batteries,
Power conditioning,
Predictive failure notification,
Rack/Tower Convertible,
Resettable circuit breakers,
Safety-agency approved,
Scalable runtime,
Serial Connectivity,
SmartSlot,
User-replaceable batteries.
| Features | |
| Output power capacity | 10 kVA |
| Output power | 8400 W |
| Emergency Power Off (EPO) | Y |
| Battery | |
| Typical backup time at full load | 4 min |
| Typical backup time at half load | 13.2 min |
| Replacement battery cartridge | RBC44 |
| Design | |
| Product colour | Black |
| Operational conditions | |
| Operating temperature (T-T) | 0 - 40 øC |
| Storage temperature (T-T) | -15 - 45 øC |
| Operating relative humidity (H-H) | 0 - 95% |
| Storage relative humidity (H-H) | 0 - 95% |
| Operating altitude | 0 - 3000 m |
| Weight & dimensions | |
| Weight | 111 kg |
| Other features | |
| I/O ports | Pre-Installed SmartSlot Cards - AP9619 |
| Battery type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte: leakproof |
| Interface | DB-9 RS-232, RJ-45 10/100 Base-T, Smart-Slot |
| Output connections | (1) Hard Wire 3-wire (H N + G) (4) IEC 320 C13 (4) IEC 320 C19 (4) IEC Jumpers |
| Input connection type | Hard Wire 3 wire (1PH+1PH+G), Hard Wire 5-wire (3PH + N + G) |
| Dimensions (WxDxH) | 430 x 660 x 260 mm |
| Nominal output voltage | 230 V |
| Output voltage note | Configurable for 220: 230 or 240 nominal output voltage |
| Filtering description | 0.3% IEEE/UL 1449 |
| Nominal input voltage | 230 V |